PhD Thesis
UNIVERSITY POLITEHNICA OF BUCHAREST
FACULTY OF APPLIED CHEMSITRY AND MATERIALS SCIENCE
PhD Thesis title: Nanocomposites with applications in aircraft industry
Author: Chem. Eng. Cristina- Elisabeta BAN (căs. PELIN)
Scientific advisor: Prof. PhD. Eng. Ecaterina ANDRONESCU
Workshop
3rd International Workshop on Numerical Modelling in Aerospace Sciences, NMAS 2015, 06 - 07 May 2015, Bucharest, Romania: DVD = ISSN 2360–1809, ISSN-L 2360-1809. Date of printing:18.06.2015)
((only the INCAS authors)
Keynote Speaker
- Ruxandra Mihaela BOTEZ, Level D Research Aircraft Flight Simulator use for Novel Methodologies in Aircraft Modeling and Simulation
Section 01 – Launchers propulsion technologies and simulations of rocket engines
- Irina Carmen ANDREI, Mihai Leonida NICULESCU, Mihai Victor PRICOP, Andreea CERNAT, The Completion of the Mathematical Model by Parameter Identification for Simulating a Turbofan Engine
- Irina Carmen ANDREI, Mihai Leonida NICULESCU, Mihai Victor PRICOP, Andreea CERNAT, Issues and Numerical Approaches of Shock Waves with Application to Supersonic Air Intakes
- Marius-Gabriel COJOCARU, Mihai-Leonida NICULESCU, Mihai-Victor PRICOP, Aero-Acoustic assessment of installed propellers
- Alexandru IONEL, Upper stage end of mission LEO deorbit using solar radiation pressure effects upon an inflated envelope sphere deorbit device
- Achim IONITA, Ionel POPESCU, Attitude Dynamics and Tracking Control of Spacecraft in the Presence of J2 Perturbations
- Ion MALAEL, Horia DUMITRESCU, Vladimir CARDOS, The Evaluation of the Boundary Vorticity by URANS and LES Methods
- Mihai Leonida NICULESCU, Marius Gabriel COJOCARU, Mihai Victor PRICOP, Dumitru PEPELEA, Computations of the Shock Waves at Hypersonic Velocities Taken into Account the Chemical Reactions that Appear in the Air at High Temperatures
- Mihai Victor PRICOP, Mircea BOSCOIANU, Numerical Signal Processing and Analysis of the Sensors Signals in a Buffet Investigation Wind Tunnel Campaign
- Mihai Victor PRICOP, Marius Gabriel COJOCARU, Mihai Leonida NICULESCU, Mircea BOSCOIANU, Earth Reentry Tool for Preliminary Mission Analysis
Section 3 – Modelling of structural problems in aerospace airframes
- Alexandru-Mihai CISMILIANU, Ionut-Cosmin ONCESCU, Simulating material behavior of 3D Printed ABS* Parts (*ABS - Acrylonitrile Butadiene Styrene)
- Daniela ENCIU, Adrian TOADER, Mihai TUDOSE, Ioan URSU, A Thorough Analysis of Damages in Space SHM
- Ioana Raluca EDU, Felix Constantin ADOCHIEI, Teodor Lucian GRIGORIE, Ruxandra Mihaela BOTEZ , Tuning of a Wavelet Filter for Miniature Accelerometers Denoising based Joint Symbolic Dynamics (JSD) Method
- Alexandru Camil MURESAN, Alexandru PANA, Anna-Maria Theodora ANDREESCU, Claudiu-Ionut CHERCIU, Constantin VISOIU, Gavril-Iulian ZAHARACHESCU, Petrisor PARVU, Autonomous System for Image Geo-Tagging and Target Recognition
PROCEEDINGS
- Daniela Baran*, Nicolae Apostolescu, A Virtual Dimensionality Method for Hyperspectral Imagery, Procedia Engineering Volume 100, 2015, pp. 460-465, DOI information: 10.1016/j.proeng.2015.01.391, 25th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2014, ELSEVIER, http://www.sciencedirect.com/science/article/pii/S187770581500418X
AEROSPATIAL 2014 - Proceedings of the International Conference of Aerospace Sciences “AEROSPATIAL 2014”, 18 - 19 September 2014, Bucharest, Romania, code: ISSN 2067-8614, ISSN-L 2067-8614. The volume has 500 pages, date of printing: 18/03/2015
(only the INCAS authors)
- Overview on BEAWARE project and survey results, Claudia DOBRE, Kristo REINSALU, pp. 9-13
- Applications of the Fourier Analysis and Fourier Integral to the Calculation of Some Unsteady Flows about Lifting Surfaces, Valentin Adrian Jean BUTOESCU, pp. 47-56
- High Speed Testing for Reentry Vehicles, Mihai Victor PRICOP, Corneliu STOICA, Florin MUNTEANU, Mihai Leonida NICULESCU, Marius Gabriel COJOCARU, Irina Carmen ANDREI, Alexandru Marius PANAIT, pp. 67-71
- Velocity distribution as a result of the interaction between organizational processes in shear flows, Stefan N. SAVULESCU, Florin BALTARETU, pp. 73-77
- Calculation Methods for Aerodynamic Load Distribution and Associated Flight Dynamics Derivatives of Non-Planar Configurations of an Aircraft in the Pre-Concept Stage, Andrei Sorin NEAMŢU, Mihai NEAMŢU, Stefan NEBANCEA, pp. 87-91
- Algorithm and code for analyzing hyperspectral images using the Hurst exponent, Nicolae APOSTOLESCU, Daniela BARAN, pp. 195-201
- A LQG Based Method for the Design of the Control System of a Launch Vehicle, Irina-Oana MIU, Silvia NECHITA, Adrian-Mihail STOICA, pp. 203-214
- Kinematics Structure for the Movement of a Set of Punctual Bodies, Sorin Stefan RADNEF, pp. 215-219
- An accelerated evaluation concerning the thermal behavior of aerospace, materials, Victor MANOLIU, Gheorghe IONESCU, Silviu IVAN, pp. 239-246
- Effect of Nanoclay and Carbon Nanotubes Addition in Polypropylene Nanocomposites, Cristina-Elisabeta BAN, Adriana STEFAN, Ion DINCA, George PELIN, Anton FICAI, Ecaterina ANDRONESCU, Ovidiu OPREA, pp. 247-255
- Fatigue Life Experiments of the IAR-99 Aircraft, Dorin LOZICI-BRINZEI, Simion TATARU, Radu BISCA, pp.265-278
- Finite element numerical experiences based on MWCNT composite mechanical tests, Daniela BARAN, Mihaela PETRE, George PELIN, Adriana STEFAN, Cristina Elisabeta BAN, Elena VAJAIAC, pp. 279-286
- Thermal shock performance of ablative/ceramic composite materials, Adriana STEFAN, Gheorghe IONESCU, George PELIN, Cristina BAN, Ion DINCA, Beatriz PEREZ, Sonia FLOREZ, Jorge BARCENA, Konstantina MERGIA, Kostoula TRIANTOU, Christian ZUBER, Waldemar ROTAERMEL, Jean-Marc BOUILLY, Gregory PINAUD, Wolfgang FISCHER, pp. 287-298
- The use of Piezoelectric Wafer Active Sensor (PWAS) in Structural Health Monitoring (SHM) of Aerospace Structures, Victor GIURGIUTIU, pp. 321-331
- Finite element analysis of the electromechanical impedance method on aluminum plates in SHM, Cristian RUGINA, Victor GIURGIUTIU, Ioan URSU, Adrian TOADER, pp. 343-348
- Damage identification and damage metrics in SHM, Daniela ENCIU, Mihai TUDOSE, Bogdan NECULAESCU, Adrian TOADER, Ioan URSU, pp. 349-364
- Tunning of the Lamb waves in aluminum plates for Structure Health Monitoring, Tiberiu Adrian SALAORU, Minodor ARGHIR, Marina ANDREI, pp. 365-372
INCAS BULLETIN (only INCAS authors). More information: http://bulletin.incas.ro
Volume 7, Issue 4/ 2015, (online) ISSN 2247–4528; (print) ISSN 2066–8201; ISSN-L 2066-8201; DOI: 10.13111/2066-8201 (only the first page to every article). Date of printing and online: 10.09.2015
FULL PAPERS
- Tudorel Petronel AFILIPOAE, Marius STOIA-DJESKA, Development of a Three-Dimensional Unstructured Euler Solver for High-Speed Flows, pp. 3-18, DOI: 10.13111/2066-8201.2015.7.4.1; http://dx.doi.org/10.13111/2066-8201.2015.7.4.1
- Alexandru-Mihai CISMILIANU, Alexandru BOROS, Ionut-Cosmin ONCESCU, Florin FRUNZULICA, New Urban Vertical Axis Wind Turbine Design, pp. 67-76, DOI: 10.13111/2066-8201.2015.7.4.6; http://dx.doi.org/10.13111/2066-8201.2015.7.4.6
- Marius Gabriel COJOCARU, Mihai Leonida NICULESCU, Dumitru PEPELEA, Leading Edge Device Aerodynamic Optimization, pp. 77-8, DOI: 10.13111/2066-8201.2015.7.4.7; http://dx.doi.org/10.13111/2066-8201.2015.7.4.7
- Ion MALAEL, Horia DUMITRESCU, Vladimir CARDOS, The Evaluation of the Boundary Vorticity by URANS and LES Methods, pp. 103-109, DOI: 10.13111/2066-8201.2015.7.4.10; http://dx.doi.org/10.13111/2066-8201.2015.7.4.10
- Ionut-Cosmin ONCESCU, Alexandru-Mihai CISMILIANU, Florin FRUNZULICA, An impact study of a capsule with a rigid wall using the SPH approach, pp. 155-162, DOI: 10.13111/2066-8201.2015.7.4.14; http://dx.doi.org/10.13111/2066-8201.2015.7.4.14
TECHNICAL-SCIENTIFIC NOTES and REPORTS
- Alexandru PANA, Alexandru Camil MURESAN, Constantin VISOIU, Theodora ANDREESCU, Petrisor PARVU, Iulian ZAHARACHESCU, Claudiu CHERCIU, Phoenix Team's 2015 Unmanned Autonomous System, pp. 205-221,DOI: 10.13111/2066-8201.2015.7.4.19; http://dx.doi.org/10.13111/2066-8201.2015.7.4.19
INCAS BULLETIN (only INCAS authors). More information: http://bulletin.incas.ro
Volume 7, Issue 3/ 2015, (online) ISSN 2247–4528; (print) ISSN 2066–8201; ISSN-L 2066-8201; DOI: 10.13111/2066-8201 (only the first page to every article). Date of printing and online: 10.09.2015
FULL PAPERS
- Irina Carmen ANDREI, Mihai Victor PRICOP, Mihai Leonida NICULESCU, Andreea CERNAT, The completion of the mathematical model by parameter identification for simulating a turbofan engine, pp. 25-37, DOI: 10.13111/2066-8201.2015.7.3.3; http://dx.doi.org/10.13111/2066-8201.2015.7.3.3
- Valentin Adrian Jean BUTOESCU, Aerodynamic Interference between Oscillating Lifting Surfaces and Fuselage. Part 5: A Panel Method for Non-Lifting Bodies, pp. 59-71, DOI: 10.13111/2066-8201.2015.7.3.6; http://dx.doi.org/10.13111/2066-8201.2015.7.3.6
- Teodor Viorel CHELARU, Adrian CHELARU, Alexandru Iulian ONEL, Small Orbital Launcher - Risk Zone Evaluation, pp. 73-87, DOI: 10.13111/2066-8201.2015.7.3.7; http://dx.doi.org/10.13111/2066-8201.2015.7.3.7
- Horia DUMITRESCU, Vladimir CARDOS, Ion MALAEL, Boundary Vorticity Dynamics at Very Large Reynolds Numbers, pp. 89-100, DOI: 10.13111/2066-8201.2015.7.3.8; http://dx.doi.org/10.13111/2066-8201.2015.7.3.8
- Mihai Leonida NICULESCU, Marius Gabriel COJOCARU, Mihai Victor PRICOP, Dumitru PEPELEA, Computations of the Shock Waves at Hypersonic Velocities Taken into Account the Chemical Reactions that Appear in the Air at High Temperatures, pp. 129-13, DOI: 10.13111/2066-8201.2015.7.3.12; http://dx.doi.org/10.13111/2066-8201.2015.7.3.12
TECHNICAL-SCIENTIFIC NOTES and REPORTS
- Elena BALMUS, Avionics and ATC Technology for Mission Control, pp.161-171, DOI: 10.13111/2066-8201.2015.7.3.15; http://dx.doi.org/10.13111/2066-8201.2015.7.3.15
- Anton IVANOVICI, Marius Alexandru PANAIT, Overload prevention in model supports for wind tunnel model testing, pp. 173-180, DOI: 10.13111/2066-8201.2015.7.3.16; http://dx.doi.org/10.13111/2066-8201.2015.7.3.16
INCAS BULLETIN (only INCAS authors). More information: http://bulletin.incas.ro
Volume 7, Issue 2/ 2015, (online) ISSN 2247–4528; (print) ISSN 2066–8201; ISSN-L 2066-8201; DOI: 10.13111/2066-8201 (only the first page to every article). Date of printing: 12/06/2015
FULL PAPERS- Cristina-Elisabeta PELIN (BAN), Adriana STEFAN, George PELIN, Ion DINCA, Anton FICAI, Ecaterina ANDRONESCU, Georgeta VOICU, Mechanical Properties of Nanofilled Polypropylene Composites, pp. 113 - 121, DOI: 10.13111/2066-8201.2015.7.2.11; http://dx.doi.org/10.13111/2066-8201.2015.7.2.11
- Mihai Victor PRICOP, Marius Gabriel COJOCARU, Mihai Leonida NICULESCU, Mircea BOSCOIANU, Earth Reentry Tool for Preliminary Mission Analysis, pp. 123 - 127, DOI: 10.13111/2066-8201.2015.7.2.12; http://dx.doi.org/10.13111/2066-8201.2015.7.2.12
- Mihai Victor PRICOP, Marius Gabriel COJOCARU, Maria Cristina FADGYAS, Mircea BOSCOIANU, Signal processing and analysis in a buffet onset wind tunnel campaign, pp. 129 -136, DOI: 10.13111/2066-8201.2015.7.2.13; http://dx.doi.org/10.13111/2066-8201.2015.7.2.13
BOOK REVIEWS, pp. 163-164
- Reviewed by PhD. Eng. Irina Carmen ANDREI
Rocket Propulsion Elements, George P. SUTTON, Oscar BIBLARZ, John Wiley & Sons, New Jersey, 2010, 8th Edition, ISBN 978-0-470-08024-5, pp. 165 - 167
INCAS BULLETIN (only INCAS authors). More information: http://bulletin.incas.ro
Volume 7, Issue 1/ 2015, (online) ISSN 2247–4528; (print) ISSN 2066–8201; ISSN-L 2066-8201; DOI: 10.13111/2066-8201 (only the first page to every article)
FULL PAPERS- Daniela BARAN, Mihaela PETRE, George PELIN, Elena VAJAIAC, Mechanical tests, static and modal finite element analysis for MWCNT composite materials, pp.13-28, http://dx.doi.org/10.13111/2066-8201.2015.7.1.2
- Valentin BUTOESCU, Similitude Criteria for Aeroelastic Models, pp. 39-50, DOI: 10.13111/2066-8201.2015.7.1.4; http://dx.doi.org/10.13111/2066-8201.2015.7.1.4
- Horia DUMITRESCU, Vladimir CARDOS, Vorticity Waves in Shear Flows, pp. 51-56, DOI: 10.13111/2066-8201.2015.7.1.5; http://dx.doi.org/10.13111/2066-8201.2015.7.1.5
- Adrian TOADER, Ioan URSU, Daniela ENCIU, New Advances in Space SHM Project, pp. 65-80, DOI: 10.13111/2066-8201.2015.7.1.7; http://dx.doi.org/10.13111/2066-8201.2015.7.1.7
- Ion DIMA, Buckling of Flat Thin Plates under Combined Loading, 83-96, DOI: 10.13111/2066-8201.2015.7.1.8; http://dx.doi.org/10.13111/2066-8201.2015.7.1.8
- Daniela MOCENCO, Management strategies in the aerospace industry. Particular case: The Boeing Company, pp. 111-119, DOI: 10.13111/2066-8201.2015.7.1.10; http://dx.doi.org/10.13111/2066-8201.2015.7.1.10
- Reviewed by Irina Carmen ANDREI: Speed Wind Tunnel Testing, B. BARLOW, William H. RAE Jr., Alan POPE, Wiley & Sons, New York, Toronto, 1999, 3rd Edition, ISBN 978-0-471-55774-9, pp. 133-135
- Reviewed by Ruxandra-Laura BOSILCA: Air Power: Challenges and Opportunities, R. Dam (Author), John Andreas Olsen (Editor), Jostein Gronflaten (Preface), Publisher: Potomac Books, United States of America (July 15, 2014), ISBN-10 1612346812, ISBN-13 978-1612346816, pp. 137-139