6th International Workshop on Numerical Modelling in Aerospace Sciences, “NMAS 2018”, 16 - 17 May 2018, Bucharest, Romania;
Code DVD: ISSN 2360–1809, ISSN-L 2360-1809. Book of Abstracts "NMAS 2018" Date of publication: may 2018
(only the INCAS authors)
Keynote speaker / Plenary Lectures
- Simulation Model of the UAS-S4 Ehécatl and UAS-S45 Balaam, Ruxandra Mihaela BOTEZ (Canada Research Chair Tier 1 in Aircraft Modeling and Simuation New Technologies, Laboratory of Applied Research in Active Controls, Avionics and AeroServoElasticity LARCASE, ÉTS)
Section 1 – Launchers propulsion technologies and simulations of rocket engines
- Numerical simulation for Automatic Control in Axial Compressor System, Irina-Carmen ANDREI (INCAS – National Institute for Aerospace Research “Elie Carafoli”, B-dul Iuliu Maniu 220, Bucharest 061126, Romania), Gabriela STROE* (“POLITEHNICA” University of Bucharest, Faculty of Aerospace Engineering, Gh. Polizu Street 1-7, Sector 1, Bucharest, 011061, Romania)
- Computational Study in Centrifugal Compressor, Irina-Carmen ANDREI (INCAS – National Institute for Aerospace Research “Elie Carafoli”, B-dul Iuliu Maniu 220, Bucharest 061126, Romania), Gabriela STROE* (“POLITEHNICA” University of Bucharest, Faculty of Aerospace Engineering, Gh. Polizu Street 1-7, Sector 1, Bucharest, 011061, Romania)
Section 2 – Flight dynamics simulation
- Mathematical model of electrohydraulic servomechanism with control delay. Numerical simulations, Daniela ENCIU* (INCAS – National Institute for Aerospace Research “Elie Carafoli”, Systems Department, Bd. Iuliu Maniu 220, 061126 Bucharest, Romania and “POLITEHNICA” University of Bucharest, Department of Mathematics and Informatics, Splaiul Independentei 313, 060042 Bucharest, Romania), George TECUCEANU (INCAS – National Institute for Aerospace Research “Elie Carafoli”, Systems Department, Bd. Iuliu Maniu 220, 061126 Bucharest), Ioan URSU (INCAS – National Institute for Aerospace Research “Elie Carafoli”, Systems Department, Bd. Iuliu Maniu 220, 061126 Bucharest)
- Aircraft super-maneuver dynamic model, Andrei LUNGOCI* (INCAS - National Institute for Aerospace Research “Elie Carafoli”, B-dul Iuliu Maniu 220, Bucharest 061126, Romania), Petrisor Valentin PARVU (“POLITEHNICA” University of Bucharest, Aerospace Sciences Department, 313 Spl. Independentei, Bucharest 060042, Romania)
- Hypersonic Axisymmetric CFD Code, Mihai Leonida NICULESCU*, Marius Gabriel COJOCARU, Mihai Victor PRICOP, Maria Cristina FADGYAS, Mihaita Gilbert STOICAN, Dumitru PEPELEA (INCAS – National Institute for Aerospace Research “Elie Carafoli”, 220 Iuliu Maniu Avenue, 061126 Bucharest 6, P.O. 76, Romania)
- Notes on Aerodynamic Balance Signal Processing, Alexandru Marius PANAIT*, Mihai Victor PRICOP (INCAS – National Institute for Aerospace Research “Elie Carafoli”, B-dul Iuliu Maniu 220, Bucharest 061126, Romania)
- Comparative Risk Assessment in Applied Aerospace Projects uzing different approachs, Manuela RUSU*, Ilinca SOARE (Universitatea POLITEHNICA din Bucureºti, Splaiul Independen?ei, nr. 313, Bucure?ti 060042, Romania and INCAS - National Institute for Aerospace Research “Elie Carafoli”, B-dul Iuliu Maniu 220, Bucharest 061126, Romania)
- Backstepping Control Method for a Hexacopter Vehicle, Serena Cristiana VOICU* (1INCAS – National Institute for Aerospace Research “Elie Carafoli”, B-dul Iuliu Maniu 220, Bucharest 061126, Romania), Valentin PANA (“POLITEHNICA” University of Bucharest, Faculty of Aerospace Engineering, “Elie Carafoli” Aerospace Sciences Department, Spl. Independentei 313, Bucharest, Romania)
Section 3 – Modelling of structural problems in aerospace airframes
- Thermal effects on stiffness for single - lap, single - bolt, hybrid metal – composite joints, Calin-Dumitru COMAN (INCAS – National Institute for Aerospace Research “Elie Carafoli”, B-dul Iuliu Maniu 220, Bucharest 061126, Romania)
- A New Rotor Design for Vawt Technology, Ion MALAEL (COMOTI - National Research and Development Institute for Gas Turbines, Bucharest, Bd. Iuliu Maniu 220), Radu BOGATEANU (INCAS - National Institute for Aerospace Research "Elie Carafoli", Bucharest, Bd. Iuliu Maniu 220), Alexandru DUMITRACHE* (“Gheorghe Mihoc – Caius Iacob” Institute of Mathematical Statistics and Applied Mathematics of the Romanian Academy, Calea 13 Septembrie no. 13, 050711 Bucharest, Romania), Vladimir CARDOS (“Gheorghe Mihoc – Caius Iacob” Institute of Mathematical Statistics and Applied Mathematics of the Romanian Academy, Calea 13 Septembrie no. 13, 050711 Bucharest, Romania), Horia DUMITRESCU (“Gheorghe Mihoc – Caius Iacob” Institute of Mathematical Statistics and Applied Mathematics of the Romanian Academy, Calea 13 Septembrie no. 13, 050711 Bucharest, Romania)
- Preliminary optimal design of supersonic wind tunnel campaign with respect to model scale, regimes, internal balance and model support, Mihai Victor PRICOP*, Mihaela MANEA, Mihaita Gilbert STOICAN, Eliza Ioana ALBU, Raluca BALASA, Corneliu Ioan STOICA (INCAS – National Institute for Aerospace Research “Elie Carafoli”, B-dul Iuliu Maniu 220, Bucharest 061126, Romania)
Section 4 – System design for small satellites
- Step-by-step approach towards support and development for a Microlauncher, Ana-Maria NECULAESCU (INCAS – National Institute for Aerospace Research “Elie Carafoli”, B-dul Iuliu Maniu 220, Bucharest 061126, Romania)
- MDO approach for a two-stage microlauncher, Alexandru-Iulian ONEL*, Tudorel-Petronel AFILIPOAE, Ana-Maria NECULAESCU, Mihai Victor PRICOP (INCAS – National Institute for Aerospace Research “Elie Carafoli”, B-dul Iuliu Maniu 220, Bucharest 061126, Romania)
- Shock Control Bumps for Strut Braced Wings, Dumitru PEPELEA*, Marius Gabriel COJOCARU, Mihai Victor PRICOP, Mihai Leonida NICULESCU (INCAS – National Institute for Aerospace Research “Elie Carafoli”, Flow Physics Department, Numerical Simulation Unit, B-dul Iuliu Maniu 220, Bucharest 061126, Romania)
- Proceedings of the 37th “Caius Iacob” Conference on Fluid Mechanics and its Technical Applications, 16 - 17 November, 2017, Bucharest, Romania (Book of Abstracts & Extended Abstracts), code: ISSN 2067 - 4414, ISSN- L 2067 - 4414 ); Date of printing: 15.05.2018
INCAS BULLETIN 2018 (only the first page to every article). Full papers and more information: http://bulletin.incas.ro
(only the INCAS authors)
Volume 10, Issue 4 / 2018, (online) ISSN 2247–4528; (print) ISSN 2066–8201; ISSN-L 2066-8201; DOI: 10.13111/2066-8201 (only the first page to every article). Date of printing and online: 06.12.2018.
More information: http://bulletin.incas.ro ; (http://bulletin.incas.ro/volume_10_issue_42018.html
Full Papers
- Corneliu BERBENTE, Sorin BERBENTE, An Interpretation of the “Black Energy” in Universe by Using a Hydro-Dynamical Analogy with Newton Gravity, pp. 13-19, DOI: 10.13111/2066-8201.2018.10.4.2; https://doi.org/10.13111/2066-8201.2018.10.4.2
- Calin-Dumitru COMAN, Numerical analysis for the influence of the geometrical and mechanical parameters on the stiffness and strength of the composite bolted joints, pp. 21-33, DOI: 10.13111/2066-8201.2018.10.4.3; https://doi.org/10.13111/2066-8201.2018.10.4.3
- George Catalin CRISTEA, Alexandru RADULESCU, Constantin GEORGESCU, Irina RADULESCU, Lorena DELEANU, Influence of Additive concentration in Soybean Oil on Rheological and tribological Behavior, pp. 35-43, DOI: 10.13111/2066-8201.2018.10.4.4; https://doi.org/10.13111/2066-8201.2018.10.4.4
- Horia DUMITRESCU, Vladimir CARDOS, Radu BOGATEANU, Random Turbulence Versus Structured Turbulence, pp. 45-60, DOI: 10.13111/2066-8201.2018.10.4.5; https://doi.org/10.13111/2066-8201.2018.10.4.5
- Stefan HOTHAZIE, Camelia-Elena MUNTEANU, Alexandra-Raluca PETRE, Ionut-Cosmin ONCESCU, Ion DIMA, Automated procedure for determination of friction grip and bearing joint strength used for space missions, pp. 71-84, DOI: 10.13111/2066-8201.2018.10.4.7; https://doi.org/10.13111/2066-8201.2018.10.4.7
- Alexandru-Iulian ONEL, Tudorel-Petronel AFILIPOAE, Ana-Maria NECULAESCU, Mihai-Victor PRICOP, Drag coefficient modelling in the context of small launcher optimisation, pp. 103-116, DOI: 10.13111/2066-8201.2018.10.4.10; https://doi.org/10.13111/2066-8201.2018.10.4.10
- George SUCIU, Andrei Sorin NEAMTU, Jenica NEAMTU, Dragos OVEZEA, Maria Cristina DITU, Gabriel PETRESCU, Concurrent engineering in designing a system for sensing gas leaks in harsh space environment, pp. 181-190, DOI: 10.13111/2066-8201.2018.10.4.16; https://doi.org/10.13111/2066-8201.2018.10.4.16
Technical-Scientific Notes and Reports
- Ilie NICOLIN, Bogdan Adrian NICOLIN, Analysis of modern military jet trainer aircraft, pp. 193-202, DOI: 10.13111/2066-8201.2018.10.4.17; https://doi.org/10.13111/2066-8201.2018.10.4.17

More information: http://bulletin.incas.ro ; (http://bulletin.incas.ro/volume_10_issue_32018.html)
Full Papers- Irina-Carmen ANDREI, Gabriela STROE, Computational Study in Centrifugal Compressor, pp. 3-14, DOI: 10.13111/2066-8201.2018.10.3.1; https://doi.org/10.13111/2066-8201.2018.10.3.1
- Irina-Carmen ANDREI, Gabriela STROE, Numerical Simulations of Flow in Axial Compressor System, Preparatory Steps for Active Control, pp. 15-26, DOI: 10.13111/2066-8201.2018.10.3.2; https://doi.org/10.13111/2066-8201.2018.10.3.2
- Calin-Dumitru COMAN, George PELIN, Thermal Effects on Single - Lap, Single - Bolt, Hybrid Metal - Composite Joint Stiffness, pp. 75-88, DOI: 10.13111/2066-8201.2018.10.3.7; https://doi.org/10.13111/2066-8201.2018.10.3.7
- Stefan HOTHAZIE, Camelia MUNTEANU, Mihaela NASTASE, Radu BIBIRE, Analysis of isogrid reinforced cylindrical vessels in the case of axially symmetric buckling, pp. 89-101, DOI: 10.13111/2066-8201.2018.10.3.8; https://doi.org/10.13111/2066-8201.2018.10.3.8
- Alexandru-Iulian ONEL, Tudorel-Petronel AFILIPOAE, Ana-Maria NECULAESCU, Mihai-Victor PRICOP, MDO approach for a two-stage microlauncher, pp. 127-138, DOI: 10.13111/2066-8201.2018.10.3.11; https://doi.org/10.13111/2066-8201.2018.10.3.11
- Marilena D. PAVEL, Achim IONITA, Helicopter Roll-Axis Instabilities induced by Pilot Cyclic Control: A Physical Explanation, pp. 139-156, DOI: 10.13111/2066-8201.2018.10.3.12; https://doi.org/10.13111/2066-8201.2018.10.3.12
- Adriana STEFAN, Cristina Elisabeta PELIN, George PELIN, Daniela STELESCU, Nanofilled EPDM composite for aerospace applications, pp. 177-184, DOI: 10.13111/2066-8201.2018.10.3.15; https://doi.org/10.13111/2066-8201.2018.10.3.15
- Daniela BARAN, Simion TATARU, Mihaela PETRE, Preliminary Estimation Methods for the Definition of the Landing Gear, pp. 187-197, DOI: 10.13111/2066-8201.2018.10.3.16; https://doi.org/10.13111/2066-8201.2018.10.3.16
Volume 10, Issue 2/ 2018, (online) ISSN 2247–4528; (print) ISSN 2066–8201; ISSN-L 2066-8201; DOI: 10.13111/2066-8201 (only the first page to every article). Date of printing and online: 07.06.2018.
More information: http://bulletin.incas.ro ; (http://bulletin.incas.ro/volume_10_issue_22018.html)
Full Papers
- Foreword by Ruxandra Mihaela BOTEZ and Catalin NAE, pp. 1-2, DOI: 10.13111/2066-8201.2018.10.2.1, https://doi.org/10.13111/2066-8201.2018.10.2.1
- Franco BERNELLI-ZAZZERA, Maria Angeles MARTIN-PRATS, Francesco MARULO, Daniel HANUS, Joris MELKERT, Giorgio GUGLIERI, Pascal BAUER, Irene PANTELAKI, Iring WASSER, Herman DECONINCK, Ruxandra BOSILCA, Hanna-Kaisa SAARI, Proposal for a EU quality label for aerospace education, pp. 5-16, DOI: 10.13111/2066-8201.2018.10.2.2, https://doi.org/10.13111/2066-8201.2018.10.2.2
- Florin BODE, Iinca NASTASE, Cristiana CROITORU, Mihnea SANDU, Angel DOGEANU, Ioan URSU, Preliminary Numerical Studies for the Improvement of the Ventilation System of the Crew Quarters on Board of the International Space Station, pp. 137-143, DOI: 10.13111/2066-8201.2018.10.2.13, https://doi.org/10.13111/2066-8201.2018.10.2.13
- Cristina-Diana BRATU, Ionut-Cosmin ONCESCU, Ion DIMA, Alexandra Raluca PETRE, The validation of an aerospace structure through the sine vibration analysis, pp. 145-156, DOI: 10.13111/2066-8201.2018.10.2.14, https://doi.org/10.13111/2066-8201.2018.10.2.14
- Valentin Adrian Jean BUTOESCU, Wing in Ground Effect over a Wavy Surface, pp. 157-172, DOI: 10.13111/2066-8201.2018.10.2.15, https://doi.org/10.13111/2066-8201.2018.10.2.15
- Calin-Dumitru COMAN, Static and Dynamic Design Methods for Hybrid Bolted Joints in a Satellite Structure, pp. 185-197, DOI: 10.13111/2066-8201.2018.10.2.17, https://doi.org/10.13111/2066-8201.2018.10.2.17
- Stefan HOTHAZIE, Camelia MUNTEANU, Mihaela NASTASE, On the construction of numerical iterative schemes of any order of convergence for solving nonlinear systems of equations, pp. 207-220, DOI: 10.13111/2066-8201.2018.10.2.19, https://doi.org/10.13111/2066-8201.2018.10.2.19
Technical-Scientific Notes and Reports
- Manuela RUSU, Ilinca SOARE, Risk Assessment in Applicative Aerospace Projects using different approaches, pp. 233-246, DOI: 10.13111/2066-8201.2018.10.2.21, https://doi.org/10.13111/2066-8201.2018.10.2.21

- Foreword by Ruxandra Mihaela BOTEZ and Catalin NAE, pp. 1-2, DOI: 10.13111/2066-8201.2018.10.1.1; https://doi.org/10.13111/2066-8201.2018.10.1.1
- Gabriela IOSIF, Iulian IORDACHE, Victor STOICA, Ana Maria LUCHIAN, Emil COSTEA, George SUCIU, Victor SUCIU, Achieving a More Electric Aircraft: a comparative study between the concurrent and traditional engineering models, pp. 221-228, DOI: 10.13111/2066-8201.2018.10.1.19; https://doi.org/10.13111/2066-8201.2018.10.1.19
- Ilinca SOARE, Emil MILITARU, Consideration on EN 9100: 2016 / AS 9100D standard new changes, pp. 229-236, DOI: 10.13111/2066-8201.2018.10.1.20; https://doi.org/10.13111/2066-8201.2018.10.1.20